Welcome to the official website of Luoyang Hengli Kiln Co., Ltd.! !! !!

< >

1400 ℃ single temperature zone tube furnace

Product Numbers: HLG-X-14

Product type: single temperature zone tube furnace

Product Tips: Pictures and data are for reference only, please call the sales hotline for details

Consulting Hotline: 13938865378
Product details
HLG-X-14 tube furnace is a single temperature zone tube furnace. Heating and cooling are controlled by 16-segment programmable intelligent instruments. The furnace tube is made of high-purity corundum tube, and the highest temperature can reach 1400 ℃. This high temperature furnace can be widely used for sintering or annealing of materials (under vacuum or inert gas protection)

Technical Parameters

name 1400 ℃ single temperature zone tube furnace
Shell structure
  • 60 Adopt double-layer shell structure, make the temperature of the shell surface less than 60 degrees
  • Furnace material using mullite fiber
  • Furnace effective size
  • 高纯刚玉管 Furnace tube material: 99.8 high purity corundum tube
  • Furnace tube size: Φ30, 40, 50, 60, 70, 80, 90, 100, 110 * 1000mm, optional
  • Working power
  • AC380V / 50HZ
  • Maximum power: 6-14 KW
  • temperature
  • ≤1300℃ Working temperature: ≤1300 ℃
  • 1400℃ Maximum temperature: 1400 ° C
  • +/- 1°C Temperature control accuracy: +/- 1 ° C
  • +/- 5°C Temperature uniformity: +/- 5 ° C
  • Fastest heating rate
  • /min Recommended heating rate: <10 / min
  • Maximum heating rate 20 / min
  • Temperature Control System
  • 16 段可编程控制 Intelligent 16- segment programmable control
  • S type thermocouple for temperature measurement
  • Setting break and over temperature protection
  • Furnace door structure Water-cooled sealing flange and corundum tube are tightly combined
    Heating element Silicon Carbon Rod
    Dimensions 620 * 740 * 1015mm
    net weight 120KG
    Optional accessories Door plugs, crucible pliers, high temperature gloves, anti-loss heating elements, thermocouples, bricks
    Open door and power off Customized according to customer requirements
    Warranty One year
    Quality Certification ISO9001-2008
  • The air pressure in the furnace tube cannot be higher than 0.02MPa
  • Due to the high internal pressure of the gas cylinder, a pressure reducing valve must be installed on the gas cylinder when introducing gas into the furnace tube.
  • When the temperature of the furnace body is higher than 1000 ℃, the furnace tube cannot be in a vacuum state. The pressure in the furnace tube must be equal to the atmospheric pressure, and it must be maintained at normal pressure.
  • For the experiment of sample heating, it is not recommended to close the suction and inlet valves at the flange end of the furnace tube. If you need to close the gas valve to heat the sample, you must always pay attention to the indication of the pressure gauge. If the pressure is greater than 0.02MPa, you must immediately open the vent valve to prevent accidents (such as furnace tube rupture, flange flying out, etc.)
  • video
    ABOUT US About Hengli ABOUT US
    Luoyang Hengli Kiln Co., Ltd. (our company passed the ISO9001-2016 quality management system certification (registration number: 12818Q21620ROS) has more than 20 years of experience in producing electric heating electric furnaces. Now it has more than 20 standardized electric furnaces ... [Details 】
    NEWS Hengli Dynamic NEWS